Product Center

MP Ag Test
MP Ag Test
MP Ag Test is the chromatographic assay used for qualitative detection of the mycoplasma pneumoniae(MP) antigens in human pharyngeal swab specimen.
Contact us
Product Information


1.Remove the foil from the sample collection tube.

2.Remove a Pharyngeal swab from the pouch.

3.Hold the Pharyngeal swab across the base of the tongue and wipe up and down the posterior pharyeal wall at least 3 times.

4. Insert the swab in collection tube to the bottom, rotate and squeeze the swab 10 times, while holding the swab head against the bottom and side of the collection tube.

5.Rotate and Squeeze the tube several times with fingers from outside of the tube to immerse the swab. Remove the swab.

6. Attach the dropper tip firmly onto the tube. Mix thoroughly by swirling or flicking the bottom of the tube.


Read the instruction first prior to testing.Bring the pouched test to room temperature prior to testing.Do not open the pouch until ready to begin testing.

1.Remove the test from the sealed pouch.Lay it on a flat,clean and dry surface.

2.Place the test cassette on a flat and clean surface. Add 3 drops of test sample by squeezing the collection solution tube into each of the sample well.

3.Read results within 10-15 minutes.



POSITIVE:The presence of two lines as control line (C) and test line (T) within the result window indicates a positive result.

NEGATIVE:The presence of only control line (C) within the result window indicates a negative result.

INVALID:If no line appears in the control area (C),the test results are invalid regardless of the presence or absence of line in the test area.The direction may not been followed correctly or the test may be deteriorated.It is recommended that repeat the test using a new device.If the problem persist,please stop using the product and contact local distributor.